l-ns www.vishay.com vishay dale thin film revision: 11-jun-13 1 document number: 60027 for technical questions, contact: thinfilm@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 low value (0.03 ? to 10 ? ) thin film resistor, surface mount chip with extremely low resistances and high power capabilities, vishays proven and unique ultr a-low value resistors can be used in your hybrid or surface-mount applications. these resistors are available with solderable or weldable terminations. construction features ? homogeneous nickel alloy film ? no inductance for high -frequency applications ? alumina substrates for high power handling capability (2 w maximum power rating) ? pre-soldered or gold terminations ? epoxy bondable termination available ? sulfur resistant (per astm b809-95 humid vapor test) ? material categorization: ? for definitions of co mpliance please see www.vishay.com/doc?99912 note ? * this datasheet provides information about parts that are ? rohs-compliant and/or parts th at are non-rohs-compliant. for ? example, parts with lead (pb) te rminations are not rohs-compliant. ? please see the information/tables in this datasheet for details. typical performance notes ? resistor values beyond ranges shall be reviewed by the factory (1) 0705 and 0805 are the same (o nly use 0805 when ordering) actual size 0805 adhe s ion layer high purity alumina nickel barrier s older coating pa ss ivation re s i s tor film absolute tcr 300 tol. 1.0 value and minimum tolerance value ( ? ) minimum tolerance 0.1 2.0 % 0.25 1.0 % 0.5 1.0 % 1.0 1.0 % 2.0 1.0 % 10.0 1.0 % < 0.1 20 % available available available available standard electrical specifications test specifications conditions material nickel alloy - resistance range 0.03 ? to 10 ? - tcr: absolute 300 ppm/c - 55 c to + 125 c tolerance: absolute 1 % to 20 % ( v alue dependent) - stability: absolute -- stability: ratio -- voltage coefficient -- working voltage - operating temperature range - 55 c to + 125 c - storage temperature range - 55 c to + 150 c - noise < - 35 db (typical) - shelf life stability: absolute -- component ratings case size (1) power rating (mw) re sistance range ( ? ) 0505 125 0.05 to 5.0 0508 400 0.03 to 2.0 0603 125 0.10 to 5.0 0612 500 0.05 to 2.5 0705/0805 200 0.10 to 6.0 1005 250 0.15 to 10.0 1020 1000 0.03 to 3.0 1206 330 0.10 to 10.0 1225 2000 0.03 to 2.6 1505 500 0.25 to 10.0 2010 1000 0.17 to 10.0 2512 2000 0.18 to 10.0 p x r
l-ns www.vishay.com vishay dale thin film revision: 11-jun-13 2 document number: 60027 for technical questions, contact: thinfilm@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note (1) 0705 and 0805 are the same (onl y use 0805 when ordering) notes (1) 0.01 ? additional allowed for measurement error (2) testing conducted at 2.0 x workin g voltage on 2512 case size all other 2.5 x dimensions in inches and millimeters case size size lwt d inches millimeters inches millimeters inches millimeters inches millimeters + 0.010/- 0.005 + 0.25/- 0.13 0.005 0.13 max. + 0.010/- 0.005 + 0.25/- 0.13 0505 0.050 1.27 0.050 1.27 0.020 0.51 0.016 0.41 0508 0.047 1.19 0.081 2.06 0.020 0.51 0.015 0.38 0603 0.064 1.65 0.032 0.81 0.020 0.51 0.012 0.30 0612 0.063 1.60 0.126 3.20 0.020 0.51 0.015 0.38 0705, 0805 (1) 0.075 1.91 0.050 1.27 0.020 0.51 0.021 0.53 1005 0.100 2.54 0.050 1.27 0.030 0.76 0.021 0.53 1020 0.100 2.54 0.200 5.08 0.030 0.76 0.015 0.38 1206 0.126 3.20 0.063 1.60 0.030 0.76 0.020 0.51 1225 0.126 3.20 0.252 5.59 0.020 0.51 0.020 0.51 1505 0.150 3.81 0.050 1.27 0.030 0.76 0.021 0.53 2010 0.200 5.08 0.100 2.54 0.030 0.76 0.019 0.48 2512 0.250 6.35 0.125 3.18 0.030 0.76 0.019 0.48 d w l t mechanical specifications resistive element nickel alloy substrate material alumina terminals pre-soldered or gold lead (pb)-free option 96.5 % sn, 3.0 % ag, 0.5 % cu tin/lead option sn63 lead (pb)-free fi nish and tin/lead hot solder dip environmental tests environmental test limits (1) ? r % typical 1 ? ? r % sto (2) 0.5 - 0.19 lto 0.1 - 0.03 rsh 0.5 - 0.14 moisture 0.5 0.07 hte 1.0 0.02 load life (2000 h at + 70 c) 0.5 0.20 tcr (ppm) 300 + 150 derating curve ambient temperature c 070125150 0 20 40 60 80 100 precent of rated power
l-ns www.vishay.com vishay dale thin film revision: 11-jun-13 3 document number: 60027 for technical questions, contact: thinfilm@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note (1) preferred packaging code global part number information new global part numbering: l-1206m1r00gbt1 global model case size tcr characteristics ohmic value tolerance termination packaging l- = low value ? wraparound ? chip resistor 0505 ? 0508 ? 0603 ? 0612 ? 0805 (1) ? 1005 ? 1020 ? 1206 ? 1225 ? 1505 ? 2010 ? 2512 m = 300 ppm/c ? n = 350 ppm/c ? o = 400 ppm/c ? p = 500 ppm/c first 3 digits are significant figures and the last digit specifies the number of zeros to follow. r designates the decimal point. ? ? example: ? 0r10 = 0.1 ? ? 1r60 = 1.6 ? f = 1 % ? g = 2 % ? h = 3 % ? j = 5 % ? k = 10 % ? l = 20 % b = wraparound sn/pb solder ? 63 % sn/37 % pb w/ ? nickel barrier ? g = wraparound au over ni ? (gold) termination ? epoxy bondable ? rohs compliant - e4 ? w = top side wire bondable ? au (gold) ? rohs compliant - e4 ? s = wraparound lead (pb)-free ? solder ? 96.5 % sn/3.0 % ag/ ? 0.5 % cu ? rohs compliant - e1 bs = bulk ? 100 min., 1 mult ? ws = waffle ? 100 min., 1 mult ? ? tape and reel ? t0 = 100 min., 100 mult ? t1 = 1000 min., 1000 mult (1) ? t3 = 300 min., 300 mult ? t5 = 500 min., 500 mult ? tf = full reel ? ti = 100 min., 1 mult ? (item single lo t date code) ? ts = 100 min., 1 mult historical part number example: l1206m 1r00hbt (for refere nce purposes only) l 1206 m 1r00 h b t style case size tcr characteristics ohmic value tolerance termination packaging 1206m1r0 0gbt1 l-
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
